Refinish Hardwood Floors in Austin, Texas, with Waterborne Stains and Finishes

Using Sansin's water-based 0-VOC stains and low-VOC, ultra high-performing topcoats allow for a faster stain and finish process. Refinish your floors in less time with no toxic smell and a tiny fraction of the VOC content of traditionally used products.

Awesome recent remodel in Austin that used Sansin 0-VOC (in Puritan Pine) with Sansin Floor (in Semi-Gloss) on oak hardwoods.

If you have an old, tired hardwood floor, refinishing it is the best bet for the money. You can make a dramatic change in color - or just freshen everything up and lively up your space. When looking for a floor refinishing company, keep your timeframe and health in mind, and make sure that they are comfortable with waterborne products. Some guys refuse to even try them because they are afraid to try them or have seen cheap waterborne products fail in the past. Sansin Purity Interior 0-VOC stain is easy to apply and your first coat of finish can be applied in 15-30 minutes after staining....not 12-72 hours like some coventional products. As long as the stain is applied correctly, deep rich tones are achieved with no lap marks. Another step is completely cut out using Sansin's products - a sealer is not needed.

Why is a sanding sealer not needed? Sansin's Floor is a penetrating alkyd formula that penetrates, seals, and finishes with one step. Having a low-VOC, penetrating finish coat is important to expedite the refinish job! Floor is a heavy duty alkyd-polyurethane. All products are non-flammable and clean up with soap and water...